Be taught in regards to the superior enhancements and capabilities of the Palette 2 and begin 3D printing with as much as 4 colours on a single-extruder 3D printer.
Posted on February 19, 2019
by
Chris Morgan
The Palette 2 from Mosaic Manufacturing is the second iteration of their wildly well-liked filament splicing machine for single extruder 3D printers. We check out the modifications made and the way they profit the consumer, in addition to go to enhancements to the just about full redesign of the chassis, making it way more user-friendly and accessible for the top consumer.
Mosaic Manufacturing nearly stands alone within the business as the most important identify in enabling the at-home 3D printer consumer with the flexibility to show a single-extruder 3D printer right into a four-color powerhouse. Their preliminary Palette mannequin was an introduction into what is feasible with this nonetheless, considerably new know-how, whereas the Palette 2 refines lots of the options and improves most of them. Headquartered in Canada, Mosaic Mfg. is creating choices in additive manufacturing not just for the house consumer however for industries as nicely. With their SEEM know-how, they hope to allow each consumer from the hobbyist, all the best way to the manufacturing facility ground.
Only a small pattern of the superior designs you may make multi-color with the Palette 2.
Product Options
- Plug and Play Setup
- 4 Colours Spliced Into One Functionality
- A number of Materials Sort Assist
- Simple to Clear Jams and Restore
The brand new Palette 2 is way simpler to configure and arrange for the hobbyist 3D printer than the earlier Palette. The interface is less complicated to work with, and there’s no longer a necessity to put in a separate sensor to measure filament stream onto the 3D printer; the stream sensor is now constructed immediately into the Palette 2. Synching with the 3D printer and pc is now a lot simpler as nicely, making your complete arrange course of a lot faster.
Plug and Play Setup
The brand new Palette 2 is way simpler to configure and arrange for the hobbyist 3D printer than the earlier Palette. The interface is less complicated to work with, and there’s no longer a necessity to put in a separate sensor to measure filament stream onto the 3D printer; the stream sensor is now constructed immediately into the Palette 2. Synching with the 3D printer and pc is now a lot simpler as nicely, making your complete arrange course of a lot faster.
The CANVAS Interface is straightforward and simple to make use of.
4 Colours Spliced Into One Functionality
The mainstay enchantment of the Palette 2 is the flexibility to show any single-extruder 3D printer right into a four-color machine able to printing multi-color prints. The brand new Palette 2 has been upgraded with a couple of options and features to make the method straightforward to make use of and execute. First is the CANVAS platform. Beforehand, there was extra hands-on implementation required from the consumer to get sustainable outcomes, by slicing twice and loading two totally different information into each the 3D printer and the Palette. Now with CANVAS, you’ll be able to add your favourite slicer profiles and work nearly fully in a single interface, with no duplicate slicing vital.
A number of Materials Sort Assist
Along with 3D printing with as much as 4 colours, the Palette 2 can be set as much as 3D print with totally different supplies in a single print. PLA and PETG are the preferred mixtures, however with 4 shops, the chances are definitely a lot bigger than with a single-extrusion machine alone. The Palette 2 is able to splicing ABS, TPU, Nylon, and PLA-scaffold as nicely.
Filament Run Out Detection
The sensors on the Palette 2 may handle filament run out and be programmed with choices. For 3D prints with lower than 4 colours, an extra spool of the identical shade and materials may be designated because the ‘back-up’ spool when the primary spool runs out, subsequently avoiding a stalled 3D print. You may as well load as much as 4 of the identical shade and filament and do large initiatives that require as much as 4 kg of filament – you received’t must run out of filament ever once more!
The Run Out Sensor helps maintain your uptime to a most.
Simple to Clear Jams and Restore
One of many extra helpful redesigns within the Palette 2 is the flexibility to simply and rapidly clear jams, impact repairs, and change broken components with the brand new modular panels. Not solely are the panels clear, so you’ll be able to see precisely the place the difficulty is, however there are a number of panels in strategic places that may be simply eliminated with thumb screws for fast entry and upkeep. This characteristic alone is a serious promoting level for this superior unit.
There are a selection of optimistic and helpful makes use of for the 3D printer at dwelling to think about shopping for the Palette 2 so as to add to their toolkit. At first is the flexibility to 3D print with as much as 4 colours. Simply upgrading to a brand new dual-extrusion 3D printer will run upwards of $1500+ for fundamental, non-supported 3D printers. Going full-bore for a quad-color machine will run considerably extra. The Palette 2 provides a really inexpensive instrument for any consumer seeking to do extra with their 3D printer.
The clear entry panels provide you with unprecedented readability when coping with troubleshooting points.
Additionally, if there are vital portions of filament getting used on a single 3D print, the Palette 2 can be utilized as an endless filament spool – successfully giving the consumer a 4 kg spool to work with (so long as they’re all loaded after all.)
Better of all are the numerous improved consumer experiences. From the interface to the setup and repairability, the Palette 2 is improved in nearly each means over the unique Palette. Mosaic Mfg. has carried out an excellent job listening to the neighborhood and making modifications that profit the consumer.
The Palette 2 comes within the base mannequin, in addition to the Palette 2+. The Palette 2+ is more proficient at filament manufacturing pace than the Palette 2, giving extra superior customers (these utilizing the Palette 2+ for industrial functions) extra choices for varied different filaments like ABS, TPU, Nylon, and PVA).
The Palette 2 can be synced together with your printer and pc on the identical time with an extra add-on, the CANVAS Hub (bought individually). This permits communication between the 3D printer and the Palette 2; you may as well join the Palette 2, 3D printer AND CANVAS to your pc, making your complete workflow integration seamless from machine to machine.
From our personal exams, the outcomes have been unbelievable. With just one small calibration situation (which we missed initially) that brought on a bit extra stringing than ordinary, we’ve had glorious outcomes with the Palette 2 and several other 3D printers we’ve examined with. As with most issues that contain 3D printing, the arrange takes a bit tweaking to get issues good and some run-throughs to ensure the tweaks are working. However as soon as we had it dialed in, it labored nice.
The Palette 2 is a superb possibility for any 3D printer consumer who’s seeking to broaden their multi-color capabilities with out having to buy a completely new 3D printer. With it’s way more inexpensive value, and the brand new and drastically improved modifications made, any consumer can reap the benefits of the Palette 2 to create some actually superb 3D prints.
Conclusion
The Palette 2 is a unbelievable add-on for anybody seeking to broaden into a number of colours or a number of filament 3D printing. The assist and enhancements from Mosaic Mfg. are top-notch, and so they have taken enter from the 3D printing neighborhood to coronary heart and vastly improved the usability and capabilities and molded them into the Palette 2.
